11
->H5->H6->H7. The control lamps indicate the selection (see below table).
•
Press the START/PAUSE button to save the water hardness.
The following settings (benchmarks) are recommended:
W
W
W
Water hardness
ater hardness
ater hardness
ater hardness
Setting
Setting
Setting
Setting
Control lamps
Control lamps
Control lamps
Control lamps
H3 + H6 + H9
H3 + H6 + H9
H3 + H6 + H9
H3 + H6 + H9
Range
Range
Range
Range
°Clark*
°Clark*
°Clark*
°Clark*
mmol/l
mmol/l
mmol/l
mmol/l
soft
0 – 8
0 – 1.1
H0
lights
soft
9 – 10
1.2 – 1.4
H1
flashes
medium
11 – 12
1.5 – 1.8
H2
f lights
medium
13 – 15
1.9 – 2.1
H3
f flashes
medium
16 – 20
2.2 – 2.9
H4 (factory setting)
f l lights
hard
21 – 26
3.0 – 3.7
H5
f flashes
hard
27 – 38
3.8 – 5.4
H6
f f lights
hard
39 – 62
5.5 – 8.9
H7
f f flashes
NOTE
NOTE
NOTE
NOTE:::: *°Clark: British degree
Fill in the salt
Fill in the salt
Fill in the salt
Fill in the salt
CAUTION:
CAUTION:
CAUTION:
CAUTION:
•
Only refill the salt container when the salt warning lamp is lighting.
•
During filling the salt container, salt and water can escape. Start a program immediately after you have
filled the container to prevent corrosion.
•
Remove the lower basket and unscrew the lid of the salt container.
•
Add about 1.2 kg of salt by using the supplied funnel tube.
•
Full fill the salt container with water (just before the first use).
•
Screw the lid firmly on again after filling the container.
•
Depending on salt resolution, the warning lamp usually disappears immediately after filling.
B
BB
B. . . .
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Fill the rinse aid dispenser
Function of rinse aid
Function of rinse aid
Function of rinse aid
Function of rinse aid
The rinse aid is automatically added during the final rinse, ensuring thorough rinsing and a spot and streak
free drying.
When to refill the rinse aid dispenser
When to refill the rinse aid dispenser
When to refill the rinse aid dispenser
When to refill the rinse aid dispenser
As long as the corresponding message does not light up in the display, you can estimate
the amount of remaining rinse aid to the optical level indicator (D
D
D
D) next to the dispenser.
When the rinse aid dispenser is full, the indicator is completely dark. If the rinse aid diminishes, the size of the
black dot changes as shown below. In order to avoid spotting, the rinse aid level must not drop below ¼.
full
¾ full
½ full
¼ full – refill
empty
Summary of Contents for GSPE 885
Page 23: ...23...