BOMANN GSPE 885, Instruction Manual, Page: 7 / 24

7
Cabinet opening and appliance d Cabinet opening and appliance d Cabinet opening and appliance d Cabinet opening and appliance diiiimension mension mension mension
Prepare the cabinet opening according
to the dimensional drawing.
Unit: mm
If the appliance is installed at the corner of the cabinet, there must remain enough space to
open the door.
1111 Kitchen furniture 2222 Dishwasher 3333 Appliance door
Unit: mm
Dimension and preparation of t
Dimension and preparation of t Dimension and preparation of t
Dimension and preparation of the decoration panel
he decoration panel he decoration panel
he decoration panel
Prepare the wooden decorative panel according to the dimensional drawing.
•
Align the drilling template and mark the necessary holes. Check this with a
spirit level.
•
Drill holes of Ø 2 mm and 10 mm depth at the pre-marked positions in the
panel. Before drilling check the furniture front of sufficient strength.
Unit: mm
Using the Using the Using the Using the top spacer top spacer top spacer top spacer
With this accessory you can compensate the gap between the control panel and decorative panel.
The top spacer consists of several layers, which are connected with a click-
mechanism.
Adjust the height of the spacer to the gap. To do this, remove the appropriate num-
ber of layers.
Fixing the decoration panel Fixing the decoration panel Fixing the decoration panel Fixing the decoration panel
aaaa T-shape plug (2 pcs)
bbbb 4 x 26 mm (2 pcs) cccc 4 x 10 mm (2 pcs) dddd 4 x 42 mm (4 pcs)
•
Insert the T-shape plugs (aaaa) into the holes of the decorative
panel and turn the screws (bbbb) in.
•
Hook the decorative panel with the T-shape plugs into the
provided slots on the appliance front. Align the panel and the
appliance front against each other.
•
Remove the screws (cccc) on the door inside.
•
Fix the decorative panel by tighten the screws (dddd) from the
door inside.