BOMANN GSPE 885, Instruction Manual, Page: 6 / 24

6
Delivery scope Delivery scope Delivery scope Delivery scope
Cutlery basket, cup shelf (2 pcs), salt funnel tube, drain hose suspension, inlet hose, installation material
Installation Installation Installation Installation
WARNING: WARNING: WARNING: WARNING:
The unit must not be connected to the mains during installing. Otherwise there is danger to life
danger to life danger to life
danger to life or electric
electric electric
electric
shock ha
shock ha shock ha
shock hazzzzard
ard ard
ard!
CAUTION CAUTION CAUTION CAUTION::::
For a correct operation the appliance must be connected properly. The specifications for water supply and
drain as well as the electrical connection must fulfill the required criteria.
Installation location
Installation location Installation location
Installation location
•
The site should be located near the water inlet and outlet, as well as near a properly grounded power
socket. Arrange a place in the cabinet under the sink for the cable and hoses.
•
Consider the necessary installation dimensions (see “Installation steps”).
•
Take care of a solid and horizontal position of the appliance. If the appliance is not horizontally leveled,
adjust the feet accordingly.
•
Power cable and water hoses may not kinked or squashed.
•
Avoid the installation: Avoid the installation: Avoid the installation: Avoid the installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors), as metal parts would be susceptible to corrosion under
such circumstances;
-
in rooms where the temperature could drop below freezing. Do not expose the appliance any weather.
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.).
Installation steps Installation steps Installation steps Installation steps
Attach the condensation strip Attach the condensation strip Attach the condensation strip Attach the condensation strip
Attach the strip under the wooden worktop to prevent it from damages of ascending water vapor.
•
First clean and dry the concerned area of the worktop thoroughly.
•
Remove the protective foil from the condensation strip and stick it flush
with the worktop edge.