BOMANN GSPE 885, Instruction Manual

Page: 8 / 24

8
Adjusting of the door spring tension Adjusting of the door spring tension Adjusting of the door spring tension Adjusting of the door spring tension
After fixing the decoration panel, the door spring tension must be adjusted accordingly.
•
Turn the adjusting screws as needed in the clockwise or counterclock-
wise direction. The steel cable tightens or loosens.
•
Check the door spring tension. If the door remains fully open horizontal-
ly and can still be easily closed, the tension is correct. Otherwise do the
adjusting again.
Connection to the water supply Connection to the water supply Connection to the water supply Connection to the water supply
Connect the water inlet hose as well as the water drain hose properly. Follow the instructions that we give you
under "Water connection".
Installation to the power supply Installation to the power supply Installation to the power supply Installation to the power supply
Consider the instructions that we give you under "Electrical connection".
Adjusting the feet
Adjusting the feet Adjusting the feet
Adjusting the feet
Place the appliance in its proper position and take care that it is leveled solid and horizontal. Check this with a
spirit level.
•
You can adjust the back foot by the adjusting screw (aaaa) at the center of
the appliance plinth front.
•
Adjust the front feet (bbbb) with a screw-wrench until the dishwasher is
leveled.
The maximum adjustment height of the feet are 70 mm.
Fixing the skirting board
Fixing the skirting board Fixing the skirting board
Fixing the skirting board
The required height of the board should meet
your standard of aesthetics as well as it should
enable the door to open/close properly.
1111 Control panel
2222 Top spacer 5~25 mm
3333 Decoration panel
4
4 4 4 Skirting board
Reference dimensions:
Reference dimensions: Reference dimensions:
Reference dimensions:
Decoration panel
Decoration panel Decoration panel
Decoration panel Skirting board
Skirting board Skirting board
Skirting board
593 mm 75 mm
583 mm 85 mm
573 mm 95 mm
563 mm 105 mm
553 mm 115 mm
543 mm 125 mm
Fixing the dishwasher Fixing the dishwasher Fixing the dishwasher Fixing the dishwasher
aaaa 4 x 26 mm (4 pcs) bbbb Covering caps (4 pcs)
Fix the appliances by screwing in the delivered screws (aaaa) from the appliance in-
side in the provided holes accordingly. Put on the caps (bbbb).
(Is the worktop made of marble or granite, fasten the appliance only sideways with the housing unit.)