BOMANN GSPE 885, Instruction Manual

Page: 20 / 24

20
Problem Problem Problem Problem Possible cause / Action Possible cause / Action Possible cause / Action Possible cause / Action
Foaming ∙ Use only special dishwasher detergent to avoid foaming. If this occurs, open the
door and let suds evaporate. Add approx. 4 liter cold water to the tub. Start a
short rinse cycle to drain out the water.
∙ Always wipe up spilled rinse aid immediately.
Plates and other flat table-
ware are not clean ∙ Select a stronger program. ∙ Make sure that the action of the detergent dis-
penser and spray arm is not blocked by large dishes.
Spots and filming on glasses
and flatware ∙ Extremely hard water ∙ low inlet temperature ∙ overloading the baskets, improp-
er loading ∙ old or damp detergent ∙ empty rinse dispenser ∙ incorrect dosage of
detergent
Cloudiness on glassware ∙ Use less detergent if you have soft water and select a shortest cycle to rinse
and clean glassware.
Black or grey marks on
dishware ∙ Aluminum utensils have rubbed against dishware. Use a mild abrasive cleaner
to eliminate those marks.
Stains on the inner surface ∙ Only use detergents without colorants.
Yellow or brown film on in-
side surface ∙ Tea or coffee stains: Using a solution of ½ cup of bleach and 3 cups of warm
water to remove the stains by hand. ∙ Iron deposits in water can cause an overall
film. Call a water softener company for a special filter.
White film on inside surface ∙ Hard water minerals: clean the interior by using a damp sponge with dishwasher
detergent. Wear rubber gloves.
Detergent dispenser doesn’t
close properly ∙ Clogged detergent residue is blocking the catch. Clean the catch.
Detergent left in dispenser ∙ Improper loaded dish is blocking the dispenser.
Unsatisfactory drying result ∙ Improper loading ∙ too less rinse aid ∙ dishes are removed too soon ∙ wrong
program has been selected ∙ use of cutlery with a low-quality coating
Error Error Error Error codes codes codes codes
With some malfunctions the appliance indicates the following error codes to warn you:
Program control lamps flashes Program control lamps flashes Program control lamps flashes Program control lamps flashes Possible Ca Possible Ca Possible Ca Possible Causes uses uses uses
Int ECO The door is opened when the dishwasher is operating.
Int Glass Water inlet malfunction
Int Rapid Water drainage malfunction
Int Pre-rinse Temperature sensor malfunction
ECO + Light Overflow occurs
ECO + Glass Water leakage occurs
ECO + Rapid Abnormal heating
CAUTION CAUTION CAUTION CAUTION::::
•
If overflow occurs, turn off the main water supply before calling an authorized technician.
•
If there is water in the lower housing part due to an overfilling or a small leak, remove this water before
restarting the appliance.