1
Configuring the Nyquist Matrix Mixer
Pre-Amp
The Nyquist Matrix Mixer Pre-Amp (NQ-P0100) is a mixer preamplifier that allows micro
-
phone, AES3 digital, and line-level source inputs to be integrated into a Nyquist system.
These input sources can then be routed to any endpoint or group of endpoints on the
network for paging or audio distribution.
You can let the Nyquist server automatically discover and configure the Matrix Mixer Pre-
Amp, or you can manually configure it through the Matrix Mixer Pre-Amp’s web-based
user interface (web UI).
A short press of the appliance’s
Reset
button reboots the device. If you press the
Reset
button for 10 seconds, the appliance returns to the factory default configuration settings.
Returning to the default configuration settings does not change the appliance’s firmware.
The following sections describe settings and configurations that can be applied to this
device which are not controlled by the Nyquist server. For information about using
Nyquist’s automatic configuration process, refer to the
Nyquist System Administrator
Guide
.
To access the appliance’s UI:
1
Access the appliance’s web UI by doing one of the following:
a)
On your web browser, enter the IP address for the appliance as the URL.
b)
From the Nyquist web UI navigation bar, select
Stations
, select
Stations Status
,
navigate to the device that you want to configure, and then select the
Link
icon.
Note:
Do not use third-party Chrome browser extensions with the Nyquist user inter
-
face
.
Figure 1. Nyquist Appliance Login
