36
Table 13. Noise Gate Settings
Enable
Enables or disables the noise gate DSP effect for this chan
-
nel.
Threshold
Sets the minimum threshold level that the signal must
reach for the noise gate to “open”, allowing the signal to
be sent to the output channel.
Threshold range is -135 to +21 db.
Attack
Sets how long it takes for the gate to open once the signal
reaches the threshold level.
Attack range is 1 to 500 ms.
Hold
Sets the length of time the gate will stay fully open after
the signal reaches the threshold level.
Hold range is 1 to 500 ms.
Decay
Sets hows quickly or slowly the gate will close once the
signal has dropped below the threshold level
and
the Hold
interval has expired.
Decay range is 0 to 2000 ms.
