12
The following table describes the Configuration tab settings when Standalone Operation
is enabled for this device:
Table 5. Configuration Settings (Standalone enabled)
Device Type
Displays the type of this device.
Device Name
Provide a name for this device.
Web Username
Provide a web username for this appliance.
Web Password
Provide a web password for logging into the appliance.
Web Confirm Password
Re-enter the password used to log into the appliance.
Time Zone
Select the time zone in which the device resides.
Prioritize Line Input
Yes or No
If a channel simultaneously receives input signals from
both a network input and a line input, “Yes” means the line
input is used, “No” means the network input is used.
PTT Type
Specifies whether the output from a connected Push-to-
Talk (PTT) microphone is controlled by the DSP Router
configuration or by the
PTT Output
configuration
(below).
Select one of the following values:
• None
• DSP Controlled
PTT Output
Specify the output port to which the PTT microphone sig
-
nal (from line input 4) will be sent.
Select one of the following values:
• None
• Line Out
Enable SIP Calls
Enables this device to receive one-way SIP calls, wherein
only the caller can be heard (such as announcements). If
enabled, a number of SIP-related configuration settings
are displayed.
SIP Server Address
Specify the IP address of the SIP Registration Server with
which the device will register.
SIP Codecs
Displays a read-only list of codecs allowed on SIP sessions.
