39
To adjust the router settings:
1
On the appliance Web UI’s main page, select
DSP
.
2
Select the
Menu
button for the channel or select the
Menu
button for the
Output
.
3
From the drop-down menu, select
Router
.
4
Adjust the input, output, and cross gain settings as desired.
5
To route a signal to a specific output, select the Input's Enable button so that it
changes from gray to green.
This signal can be sent to Network 1, 2, 3, or 4, to the Line Out, or to any combination
of these.
Network outputs are signals that can be used as an audio stream source, to be sent
by a Nyquist server to other stations or appliances.
The
Line Out
output is sent to the corresponding balanced connector on the rear
panel of the appliance.
Figure 17. Router Settings
Note:
If you want to return to the factory settings, select the
Reset
icon that appears in
the right corner.
