30
You can specify the range of frequencies that will pass through the high pass and low
pass filters and select the type of filter that is used through the channel’s
High/Low Pass
drop-down menu option.
To adjust the high/low pass parameters for a channel:
1
On the appliance Web UI’s main page, select
DSP
.
2
Select the
Menu
button for the channel.
3
From the drop-down menu, select
High/Low Pass
.
4
Set the parameters described in the following table:
Figure 13. High/Low Pass Parameters
Note:
If you want to return to the factory settings, select the
Reset
icon that appears in
the right corner.
