BOGE Operating instructions for C 16 N...C 30 N, C 16 F N...C 30 F N series screw compressors
Page 5
General
1.2
Introduction
5. Ensure that work on the electrical equipment is only executed by qualified
electricians.
6. Work on parts and devices with power applied is prohibited. Exceptions
are governed by the appropriate regulations.
7. Prior to starting work on the electrical system the power supply has to be
switched off and secured against unintentional switching on again. Imme-
diately after having finished the work all dismantled claddings and safety
devices must be refitted.
8. The operator is responsible to check the compressor daily for externally
visible damage and defects, and to immediately report any changes (in-
cluding operational behaviour).
9. When the automatic restart (Auto-Restart) is activated, the compressor will
start automatically following a voltage loss. Prerequisite: The net pressure
is lower than the set switch-on pressure.
Accident prevention
regulations
The owner of a compressor plant is responsible to ensure that it is properly in-
stalled, operated and maintained.
For operation of the compressor plant outside the Federal Republic of Ger-
many, the accident prevention regulations of the country, where the compres-
sor is operated, must be observed in addition to the data contained in these
operating instructions. In the event that measures are required above and
beyond the legal regulations specified in the Federal Republic of Germany or
the data contained in these operating instructions, then it is of utmost impor-
tance that these be carried out prior to commissioning the compressor plant.
Disposal
1.2 Introduction
The purpose of these operating instructions is to familiarize the user with the
function and all application possibilities of the compressor.
These operating instructions contain important information on how to operate
the compressor safely, economically and according to its intented use. Ob-
serving these operating instructions will assist in avoiding danger, to reduce
repair costs and down time and to increase the reliability and service life of the
compressor. It contains important information concerning the required mainte-
nance and repair measures, assists in case of malfunctions and contains data
concerning spare and wearing parts.
The operating instructions must be available to the compressor operating per-
sonnel at the place of operation, at all times.
The operating instructions must be carefully read and applied by all persons
engaged to undertake the following work on the compressor:
WARNING!
Waste oil must in no way be disposed of in the environment, mixed with
domestic refuse, or burnt in plants unapproved for that purpose.
