General
1.1
General safety instructions
Page 4
BOGE Operating instructions for C 16 N...C 30 N, C 16 F N...C 30 F N series screw compressors
Personal protective
equipment
In general for all work on the compressor
–
protective clothing,
–
chemicals resistant gloves,
–
slip-resistant safety shoes and
–
hearing protection, if applicable
are compulsory.
For special duties
–
protective helmets (for transport work with lifting gear) and
–
safety goggles (when working on the compressed air system or on the
control pneumatics)
must be worn.
Before starting work using oils or greases a skin protection cream must be
applied. Having finished the work a skin care product must be applied.
Safety instructions for
maintenance and repair
Compressor
1. Ensure that maintenance work is only carried out by appropriately trained
persons.
2. Ensure that setting work, malfunction rectification and repair is only carried
out by specialists or appropriately trained persons.
3. Prior to maintenance or repair work:
–
Actuate emergency-stop switch/button.
–
Open mains disconnecting device.
–
Secure mains disconnecting device against unintentional switching on
by means of a padlock.
–
Fix a warning label to the control and fill in the name of the person
responsible who is authorized to switch on the maschine again.
–
Check to ensure that all parts are deenergized.
–
Disconnect the compressor from the compressed air network (relieve
or isolate pressurized lines).
4. Exercise extreme caution during repair or maintenance work requiring the
compressor to be operational. Ensure that persons keep out of reach of
the hazardous area.
WARNING!
Only use original spare parts, compressor oils and operating materials
released by BOGE during repair or maintenance!
DANGER: Voltage!
When working on the electrical system there is a constant danger of getting
into contact with live parts!
To avoid such dangers the mains connection must be equipped with a dis-
connecting device!
The mains disconnecting device has to meet local requirements!
