Service Manual Miditron
®
Junior
II
/ ID 1997491 / MJ / 1.0 - June 1998 / Page 49
9. Mechanics
9.1.10
PCB Measuring Head
The PCB Measuring Head (39) is assembled to the
measuring head carrier (40).
Exchangeable components:
- PCB Measuring Head (39)
- cable PCB Measuring Head (41)
- measuring head carrier (40)
Dismantling:
- Remove top of housing (see chapter 9.1.3).
- Remove cable (41) from PCB Main (9).
- Unhook spring of measuring head carrier (40) and
remove measuring head carrier (40) upwards.
- Open plastic clamp (43) of measuring head carrier (40).
- Remove PCB Measuring Head (39).
- Remove cable (41) of PCB Measuring Head (39).
Assembling:
- Connect cable (41) to PCB Measuring Head (39). Blue
mark (arrow) of cable (41) has to be on top.
- Assemble PCB Measuring Head (39) to measuring head
carrier (40). PCB Measuring Head (39) must be in the
guide rail (45).
- Close plastic clamp (43).
- Put on measuring head carrier (40) and let it snap in.
- Hook on spring (42).
- Pull cable (41) through hole (arrow) of measuring head
carrier (40) and connect to PCB Main (9). Blue mark
(arrow) on end of cable (41) has to be on top.
Adjustment:
An adjustment is not necessary.
Fig. 16:
9
Fig. 29:
Fig. 6:
43
40
45
41
40
42
39
40
39
41
