Service Manual Miditron
®
Junior
II
/ ID 1997491 / MJ / 1.0 - June 1998 / Page 27
4. Installation
4.5
Inserting Printer Paper
The printer paper (thermal paper) is heat-sensitive and
must be kept away from direct sunlight and high
temperatures. Check that there is sufficient printer paper in
the printer paper compartment. To insert a new roll of printer
paper, follow one of the two methods below:
Method 1:
1. Open the printer cover (Fig. 34).
2. Remove the old core and any remaining paper (Fig.
34).
3. Place a new roll of paper in the printer paper
compartment (with the end of the paper pointing
downwards and towards the printer) (Fig. 34).
4. Lift the lever on the printer (Fig. 35).
5. Cut off the end of the paper at an angle and insert it into
the paper slot on the printer (Fig. 35).
6. Pull the paper through the printer and lower the lever
(Fig. 35).
7. Feed the paper through the slot in the printer cover and
then close the printer cover (Fig. 36).
8. Press <Line Feed> to advance the paper.
Method 2:
1. Open the printer cover (Fig. 34).
2. Remove the old core and any remaining paper (Fig.
34).
3. Place a new roll of paper in the printer paper
compartment (with the end of the paper pointing
downwards and towards the printer) (Fig. 34).
4. Cut off the end of the paper square and insert it into the
paper slot on the printer (Fig. 37).
5. Press <Line Feed> to advance the paper.
6. Feed the paper through the slot in the printer cover and
then close the printer cover (Fig. 36).
Fig. 37
Fig. 35
Fig. 34
Fig. 36
