20
c) Beat
my
Race
The
Beat my
Race
program gives you the chance to compete against yourself, challenging yourself to beat the time of your
previous race. This program requires a User ID, which you may create in the setting menu (see section 2.8).
After entering your User ID, start the program. It will recall the distance you did on your previous race. You also have the
possibility of changing the distance.
On the display, the green dots are the track that you are following. A flashing orange dot indicates your position throughout the
exercise.
Throughout the program, the resistance levels will stay the same until you change them. You may adjust the resistance at any
time during the exercise by pressing the
INCREASE/DECREASE SEGMENT
or
INCREASE/DECREASE LEVEL
keys if you
want to change a
segment
. This program does not have a profile level. This program has 20 different resistance values per
segment.
Your race is saved automatically and the statistics are stored under your User ID (see section 2.8 for more details). The
minimum distance is 0.2 miles.
Note:
If you change the automatically proposed distance before beginning your exercise, you will erase all the settings from your
previous race and you will not be racing against your last performance. The statistics of your current race will be saved under
your User ID for future use.
To select the
Beat my Race
program:
1. Press
the
INCREASE/DECREASE SEGMENT
keys
to select the
Be Active
category
.
Once your
selection is made, press
JustGo
™ key
to accept. If you have an
E250X / E390X,
press the
Be Active
key
to access your category directly
.
2. Choose
the
Beat my Race
program using the
INCREASE/DECREASE SEGMENT
keys
or by repeatedly
pressing the
Be Active
key
if you have an
E250X / E390X
. Once you have selected the program, press
JustGo
™ key
to access the program.
3. Select
your
User ID
by pressing the
INCREASE/DECREASE SEGMENT
keys
. Once you have selected your
USER ID, press the
JustGo
™ key
to validate.
4. Validate
your
previous distance
by simply pressing
JustGo
™ key
to access the program. To change it, press the
INCREASE/DECREASE SEGMENT
keys
to enter the
new distance
and press the
JustGo
™ key
to
validate.
5. Begin
exercising.
Summary of Contents for E230X
Page 1: ...Part no 691014 RA...
