BodyCraft HFT PRO, Owner'S Manual

Page: 35 / 45

34
R
EVIEW
A
CCESSORIES &
O
PERATIONS
O
F
A
DJUSTMENTS
34
34
a. Hang the accessories on the Top Cross Support (8) :
- Two Single Handles (32) - One Chin Assist Strap (30)
- One Triceps Rope (31) - One Sport Bar (12)
- One Long Bar (13) - One Ankle Strap (29)
- Two Chains (33) - Four Snap Hooks (34)
b. Extension chains (33) add
the extra needed length to
start any exercise with the
given accessories. Just
place the Snap Hooks on
the desired chain-link
location for the exact
additional length needed.
Then attach another end to
the cable pulley end on the
machine.
c. Snap Hooks (34) or commonly called Carabiner Clips ,
are locking (closure) mechanism to allow accessories to
be joined to the end of the cable for resistance going
directly to the weight stack. Their spring-loaded locking
(closure) mechanism helps secure the accessories
without it coming off during the exercise. Simply press in
the arm, change out the accessories desired and let the
spring-loaded arm close.
e. Chin Assist Strap (30) is to assist the
user while doing Pull-Ups. The heavier
the weight selected, equals less body
weight to pull up on the Chin Up Bar.
Secure both
Snap Hooks to
the chin assist
strap end loops
onto the right &
left cable ends.
d. Pulley Height Adjuster
(15R & 16L) can be
adjusted up or down the
upright frame by pulling
outward on the
Pop
Pin.
Then while still
holding the Pop Pin
outward, slide the
Pulley Height Adjuster
to desired level and
release the spring
loaded Pop Pin into the
corresponding locking
hole.