Product Assembly
STEP
31
19
a.
Clean Top Plate (19) & Weight Plates (21) front surface with
Rubbing Alcohol and a Clean Cotton Cloth
.
Then wipe dry with another clean cloth or allow
to completely air dry.
Recommended Conditions & Items for Installation of the
Weight Stack Stickers
WEIGHT STACK
STICKERS-SHEET (74)
CLEAN COTTON CLOTH
RUBBING ALCOHOL
MINIMUM 65
DEGREES & LOW
LOW
b.
Starting from the
Top Plate (19),
install Weight Stack
Stickers (73) for first sticker
#1.
f.
DO NOT “TEST” the sticker by
pulling on it at any time after
installed on weight stack plates.
c.
Continue installing
Weight Stack Stickers (74)
one at a time starting from the first Weight
Plate (21) using sticker #2.
Apply all corresponding stickers per each weight plate.
d.
Once the label is carefully aligned
with each weight plate (21), press
each numbered sticker gently onto
the correct weight plate. Only rub
each sticker and not the surrounding
area.
e.
Perform the same procedure from
a, b, c & d
to opposite side.
NOTE:
Allow the adhesive to cure for a minimum of 24 hrs.
Room humidity and temperature will affect the cure time.
IMPORTANT:
Before installing the weight stack stickers, it is
important to let the weight plates acclimate to room temperature.
Summary of Contents for HFT PRO
