Product Assembly
STEP
21
10
Hardware used for Step #10
Item # Description
Qty Pic
48
TOP PLATE BOLT
2
5
21
30 ft-lbs
(+/- 2 lbs)
b.
Attach the
Top Plate (19)
to the Selector Rod (20)
using the Top Plate Bolt
(48). Tighten the Top Plate
Bolt (48) using a
3/8 Allen
Wrench.
{
Recommended Torque 30 ft-lb}
c.
Perform the same procedure from
a and b
to opposite side.
a.
With the guides angled slightly, slide
Weight Plates (21)
one at a time,
onto the Guide Rods (5), making
sure to orient the selector pin holes
facing inward and to the bottom.
TWO PEOPLE ARE REQUIRED TO ASSEMBLE
THIS STEP.
NOTE:
Shown with the
standard 150 lb stacks.
Pinch Point
Keep hands clear
of edges
TIP:
Leaning Guide Rods (5) inward or
outward is acceptable to assemble
STEP #8 - STEP #11.
Summary of Contents for HFT PRO
