BodyCraft HFT PRO, Owner'S Manual

Page: 19 / 45

Product Assembly STEP
18
10 ft-lbs
(+/- 2 lbs)
20 ft-lbs
(+/- 2 lbs)
10 ft-lbs
(+/- 2 lbs)
27 ft-lbs
(+/- 2 lbs)
TIP:
Leave Chin
Bar loose until Step
#12
7
Tighten Bolts & Nuts at this time
to the Recommended Torque Specs
https://www.wikihow.com/Use-a-Torque-Wrench#Video
Example of being over-
tightened not using
the recommended
torque specs.
NOTE: Fully tighten Bolt (49) to Nut (67)
until the gap between welded tabs
and the metal bushing is closed.
Then loosen
Nut (67) ¼ to ½ turn
until the pulley swivels
freely but has almost
no play. Loosen
or tighten as needed
for both Right & Left
sides.
Double check if the Rotating
Pulley Holder (17) FREELY
swivels.
These recommended Torque
Specs should be followed for
correct assembly and safe
operation of this machine.
Tighten to torque specs ensure the
bolts and nuts do the following:
- Securely hold the frame and
moving parts from coming loose
during operation.
- Keep from crushing the frame.
- Avoid stripping the threads on
either the bolts or nuts.
- Allow moving parts to adjust freely
per the designed intent.