BodyCraft HFT PRO, Owner'S Manual

Page: 13 / 45

Product Assembly STEP
12
1
NOTE: DO NOT tighten bolts until Step # 7
Hardware used for Step #1
Item # Description Qty Pic
52 3/8" X 2-1/2" HEX BOLT 8
62 3/8" BLACK WASHER 16
69 3/8" BLACK NYLON NUT 8
Step # 1
Assembled
a. Attach Top Cross Support (8)
to the Rear Upright Frame (4)
using:
- Four 3/8" X 2- 1/2" Hex Bolts (52)
- Eight 3/8" Black Washers (62)
- Four 3/8" Black Nylon Nuts (69)
b. Attach Bottom Cross Support (9)
to the Rear Upright Frames (4) using:
- Four 3/8" X 2- 1/2" Hex Bolts (52)
- Eight 3/8" Black Washers (62)
- Four 3/8" Black Nylon Nuts (69)
TWO PEOPLE ARE REQUIRED TO ASSEMBLE THIS STEP.
TIP: Assembly of
Step #1 with both
Rear Upright
Frames (4) flat
down on floor is
another way to
assemble.