Product Assembly
STEP
32
20
b.
Lube all four Guide Rods (5) and
the
Right & Left Upright Frames
(2R & 3L)
with
100% pure Silicone
Lube or Teflon PTFE grease.
ONLY apply a light layer with a clean
rag.
Then do a set of reps with low
weights to spread the lubricant
thoroughly the rods. Repeat for
both right & left sides.
TIP:
For extra protection
from finger prints,
sweat stains or just
plan dirt, apply an
automotive grade
cleaner wax if desired.
Also makes future
cleaning easier.
RUBBING
ALCOHOL
a.
Remove all
assembly stickers
i.e. part numbers
& right / left circles.
Easy to remove with finger nail
or plastic scrapper.
If adhesive residue is on frame,
use
rubbing alcohol,
then cleaner.
Final assembly clean up, lube and polish!
c.
Wipe down frame with
mild soap & water, or
non-ammonia cleaner
i.e. Simple Green
for final cleaning.
CLEAN COTTON
CLOTH
WINDOW &
SIMPLE GREEN
CLEANERS
Summary of Contents for HFT PRO
