Product Assembly
STEP
22
NOTE:
Shown with the
standard 150 lb stacks.
11
Hardware used for Step #11
Item # Description
Qty Pic
56
5/16” x 1/2” BOTTOM HEAD BOLT
4
64
5/16” BLACK WASHER
8
60
5/16” x 3/8” SET SCREW
4
Step #10 & #11
Assembled
a.
Slide the
Top Plate (19) & Selector Rod
(pre
assembled in Step #10)
onto the Guide Rods
(5), running through the
center holes of the
Weight Plates (21).
c.
Secure the Guide
Rods (5) to Guide Rod
Holder (14) with
5/16" X 3/8" Set Screws
(60) using a
5/32 Allen Wrench.
{Recommended Torque 2 ft-lb}
d.
Perform the same
procedure from
a,
b, and c
to opposite
side.
19
b.
Attach Top
Guide Rod
Holder (14)
to the top end of
Guide Rod (5) and secure to
the top of the Left Top Frames
(6R & 6L), using two
5/16" X
5/8" Hex Dome Bolts (56)
and
two 5/16" Washers
(64) per side, using a
3/16 Allen Wrench.
{
Recommended
Torque 15 ft-lb}
TIP:
Leaning Guide Rods (5) inward or
outward is acceptable to assemble
STEP #8 - STEP #11.
Summary of Contents for HFT PRO
