Safety & Maintenance
Page 15
• Make sure all nuts, bolts, and screws are tightened prior to use.
• Be sure that all adjustment locking devices and safety devices are properly engaged prior to use!
• Never over-tighten the above-mentioned devices and parts to avoid damage to the unit.
• Check for loose parts and components and make proper adjustments prior to use.
• Check to see if there are any tears or bends in the welding or metal prior to use. If tears or bends
are found, do NOT use the unit and contact our CUSTOMER SUPPORT.
• Extreme care must be taken to not allow your feet, fingers, hair, clothing, and/or any loose items to be
snagged into any portion of the bike when the unit is in motion. Failure to follow these instructions
could result in serious injury, including the
loss of fingers.
• Always wait for the pedals and other movin
g
parts (which can gain great momentum during ridin
g
) to
come to a complete stop before dismounting
the
unit to avoid serious injury.
• Do not use solvent cleaners. If you are in any
doubt, do not use your cleansing product;
contact CUSTOMER SUPPORT.
• For any replacement warning labels, pleas
e
cont
a
ct our CUSTOMER SUPPORT at (888) 266-6789
or (909) 598-9876, or mail in a written request
to
:
Body Flex Sports, Inc. 21717 Ferrero Parkway,
Walnut, CA 91789. More detailed information
a
bout how to reach our CUSTOMER SUPPORT may
be found on Page 1 of the Owner’s Manual
und
e
r the “CUSTOMER SUPPORT” section.
• The specific Parts on your unit which may see possible signs of wear after prolonged use are listed as
follows (please check these parts before each use):
Left/Right Pedals (#56/57); Left/Right Handlebars (#10/11)
• Please review all safety instructions and warnings in this entire Owner’s Manual, as well as any
safety/warning labels affixed to the product before use.
MAINTENANCE & CARE
SAFETY & WARNINGS
BRT 3858
HOW TO (EMERGENCY) STOP
NOTE
:
Always wait for the pedals, handlebars, and/or any other moving parts (which can gain great momentum
during riding) to come to a complete stop before dismounting the unit to avoid serious injury.
1.
To reduce speed on the bike, you may use the combinations of your feet on the
Left/Right Pedals (#56/57)
and your hands on any set of the handlebars (
Left/Right Rear Handle Bars (#10/11)
or
Left/Right Handle
Bars (#12/13)
or
Pulse Handle Bar (#14)
) to gently and safely apply counter-momentum.
2.
W
ait for the pedals and handlebars to come to a complete stop.
3. Now you may safely dismount the unit
.
NOTE:
To safely move, transport, and/or store the unit, please seek the help of capable assistants (minimum 2
HOW TO MOVE/TRANSPORT THE BIKE FOR STORAGE
people total).The unit has integrated
End Cap for Front Stabilizers (#61)
purposely intended to ease this process.
1. Position one person on each side at the rear of
the bike toward the Seat (one person on the left, and one
on the right).
2. Have each person use the hand closest to grip the respective
Left/Right Rear Handle Bar (#10/11)
. Then,
use the other hand to grip the respective
Left/Right Handle Bar (#12/13)
. (These are the safest areas to avoid
injury during this process.)
3. Have both people simultaneously lift the unit to move/transport the unit to the desired area.
