A s s e m b l y S t e p 3
Others
COUPLER BAR ASSEMBLY (Part I)
Referring to the diagram below, on the right side of the
Center Post (#02)
–in the following order--slide on one
Plastic Bushing (#63),
one
Special
Washer (#46)
followed by the
Right Coupler Bar (#06)
, one
D Shape
Washer (#45),
one
Round Cap (#64),
one
Washer (#40),
and secure
using one
Bolt (#30).
On the opposite side, assemble –in the following order— slide on one
Plastic
Bushing (#63),
one
Special Washer (#46)
followed by the
Left Coupler
Bar (#05)
, one
D Shape Washer (#45),
one
Round Cap (#64),
one
Washer (#40),
and secure using one
Bolt (#30).
COUPLER BAR ASSEMBLY (Part II)
Attach the
Right Pedal Tube (#04A)
onto the
Crank (#19)
as illustrated and
secure by inserting from the outer edge of the
Right Pedal Tube (#04A)
:
one
Bolt (#22)
and one
Special Washer (#47).
Secure from the inner side
(behind the
Crank (#19)
) with one
Nylon Nut (#36).
Repeat this process on the other side using the
***PLEASE DO NOT tighten the hardware until PART III below has been completed.
This will allow you to align the holes for proper and smooth assembly***
Left Pedal Tube (#03A).
COUPLER BAR ASSEMBLY (Part III)
Using the drawings as reference, attach the free end of the bottom of the
Right Coupler Bar (#06)
to the front of the
Right Pedal Tube (#04A)
by
aligning the holes. After the holes are aligned, insert one
Bolt (#23)
through the
Right Pedal Tube (#04A)
,the
Right Coupler Bar (#06)
and
secure using one
Washer (#39)
followed by one
Nylon Nut (#37).
Repeat this process on the other side using
Left Coupler Bar(#05)
and
Left
Pedal Tube (#03
tighten the hardware on both sides.
A
). ***
Now, you may return to PART II of this Assembly Step to
Hardware Required
NUTS
WASHERS
BOLTS
#22. Bolt (1/2"x97 mm)
[2 Pieces]
#23. Bolt (M10x58 mm)
[2 Pieces]
#30. Bolt (M8x20 mm)
[2 Pieces]
#39. Washer (M10)
[2 Pieces]
#40. Washer (M8)
[2 Pieces]
#45. D Shape Washer
(19 mm) [2 Pieces]
#36. Nylon Nut (1/2")
[2 Pieces]
#37. Nylon Nut (M10)
[2 Pieces]
#64. Round Cap
(38 mm)
[2 Pieces]
#46. Special Washer
(ID.19 mm)
[2 Pieces]
#47. Special Washer
(ID.16 mm)
[2 Pieces]
#63. Plastic Bushing
[2 Pieces]
Page 8
BRT 3858
LEFT
RIGHT
Assembly Instructions
