
36.5
Removing and installing front wheel
Removing front wheel
•
Remove brake calipers.
L
Note:
Do not apply handbrake lever with brake calipers re-
moved/front wheel removed.
•
Remove retaining screw (1).
•
Loosen clamping screws (2).
•
Remove quick-release axle.
•
Remove spacer bushing (3) and speedometer
drive (4).
•
Remove front wheel.
Installing the front wheel
•
Fit the front wheel.
•
Install the spacing bushing and speedometer
drive.
e
Caution:
Locate the reaction peg (arrow) on the speedometer
drive in front of the fork slider tube.
•
Apply a light coating of
Molykote paste
to the
quick-release axle and install it.
•
Tighten the retaining screw (1).
•
Compress the front fork firmly several times.
•
Tighten the clamping screws (2).
•
Install the brake calipers.
•
[ABS]
Check sensor gap and adjust if necessary.
ABS sensor gap:
....................................................
......................... 0.45...0.55 mm (0.018 ... 0.022 in)
X
Tightening torque:
Quick-release axle threaded connection ...... 30 Nm
Clamp screws, sliding tube .......................... 22 Nm
Brake caliper to fork slider tube.................... 40 Nm
1
2
R21360011
3
4
1
2
Summary of Contents for R 1100 S
