BMW R 1100 S, Repair Manual

Page: 219 / 311

33.18
•
If necessary, fill with oil.
Quantity:
Initial filling/oil changes............................................
..........approx. 0.25 l (0.44 Imp. pint/0.26 US quart)
Oil grade:
Brand-name hypoid gear oil, SAE 90, API class GL 5
•
Install the rear wheel.
•
Install brake caliper.
e
Caution:
Do not damage brake pads; keep the brake caliper
parallel to the brake disc when installing.
•
[ABS] Install sensor (5).
•
[ABS] Check that sensor gap is correct.
ABS rear sensor gap: .............................................
......................... 0.45...0.55 mm (0.018 ... 0.022 in)
•
Install rear wheel cover.
X
Tightening torque:
Rear wheel cover to rear wheel drive
M 5 (clean Loctite 638)..................... 5 Nm
Removing and installing spring strut
L
Note:
To remove the spring strut, support the rear axle.
•
Remove the seat.
•
Remove height adjuster from seat on right.
•
Remove rear wheel.
.
•
Remove hydraulic spring adjuster.
•
Remove spring strut.
•
Installation is the reverse of the removal proce-
dure.
X
Tightening torque:
Spring strut to rear frame ............................. 50 Nm
Spring strut to swinging arm
(clean Loctite 243).......................... 58 Nm
Hydraulic spring preload adjuster
to footrest plate ........................................... 22 Nm
R21330060