BMW Motorrad S 1000 RR, Rider'S Manual

Page: 79 / 320

73
Possible settings
Warning signal
: set the in-
creasing and decreasing or in-
termittent alarm tone.
Tilt sensor
: activate inclin-
ation sensor to monitor the in-
clination of the vehicle. The
DWA responds, for example,
to wheel theft or being towed
away.
Deactivate the tilt sensor
when transporting the
vehicle in order to prevent the
DWA from tripping.
Arming tone
: confirmation
alarm tone after having activ-
ated/deactivated the DWA in
addition to flashing turn indic-
ators.
Arm automatically
: auto-
matic activation of the alarm
function when switching off the
ignition.
TYRE PRESSURE CONTROL
(RDC)
with tyre pressure control
(RDC) OE
Switching specified-pressure
warning on or off
The system can be set to
issue a specified-pressure
warning when tyre pressure
drops to the defined min-
imum.
Navigate to
Settings
,
Vehicle settings
,
RDC
.
Switch
Target pressure
warn.
on or off.
HEATED HANDLEBAR GRIPS
with heated grips OE
Operating heated handlebar
grips
The heating in the heated
handlebar grips can be
activated only when the engine
is running.
The increase in power
consumption caused by
having the heated handlebar
grips switched on can drain the
battery if you are riding at low
engine speeds. If the charge
level is low, the heated handle-
bar grips are switched off to
ensure the battery's starting
capability.
Start the engine ( 125).
Repeatedly press button 1 un-
til the desired heating level 2