BMW Motorrad S 1000 RR Rider'S Manual Download Page 74

Page: 74 / 320

OPERATION

Resuming former cruising

speed

Briefly push button

back

to return to the speed saved

beforehand.

Opening the throttle does

not deactivate cruise con-

trol. When the twistgrip is re-

leased the motorcycle deceler-

ates only to the speed saved in

memory, even if the rider inten-

ded slowing to a lower speed.

Indicator light for cruise

control lights up.

Switching off adaptive cruise

control

Slide switch

to the left.

The system is deactivated.

Button

is disabled.

HILL START CONTROL

Reading

Symbol

for Hill Start Control

appears in the Pure Ride view

and in the top status line.

Operating Hill Start Control

Requirement

Vehicle stationary and upright,

engine running.

ATTENTION

Failure of Hill Start Control

Risk of accident

Apply the brakes manually

to hold the vehicle.

Hill Start Control is purely

a comfort system to facil-

itate holding the machine and

pulling way on uphill gradients

and should not be confused

with a parking brake.

Summary of Contents for S 1000 RR

































































































































































































































































































































Search results

Summary of Contents for S 1000 RR

Reviews:

Brands by name

Popular brands

BMW Motorrad S 1000 RR, Rider'S Manual

Search results

Summary of Contents for S 1000 RR

Reviews:

Brands by name

Popular brands