BMW Motorrad S 1000 RR, Rider'S Manual

Page: 123 / 320

117
Nut for service data
package bush to frame
Thread-locking compound:
Loctite 270, High strength
50 Nm
Tighten swinging arm axle 1
to the specified torque.
Swinging arm axle to
frame
10 Nm
Install nut 2 with washer 1
and tighten with specified
torque; counter-hold the
swinging arm axle while
doing so.
Nut on swinging arm
axle
Thread-locking compound:
mechanical
100 Nm
Use the adjusting screws 2 on
left and right to adjust chain
sag.
Check chain sag ( 204).
Make sure that scale read-
ings 4 are the same on left
and right.
Tighten lock nuts 3 on left
and right to the specified
tightening torque.
Locknut of the final-
drive chain tensioning
screw
19 Nm
Tighten quick-release axle
nut 1 to the specified tight-
ening torque.
Rear quick-release axle
in swinging arm
Thread-locking compound:
mechanical
125 Nm
Check chain sag ( 204).
Remove the engine lifter.
After changing the swinging
arm pivot point, the riding