BMW Motorrad S 1000 RR Rider'S Manual Download Page 201

Page: 201 / 320

195

Top up coolant

Open cap

of the expansion

tank.

Top up coolant to the spe-

cified level using a suitable

funnel.

Check the coolant level

(

194).

Close cap

of the expansion

tank.

TYRES

Checking tyre pressure

WARNING

Incorrect tyre pressure

Impaired handling charac-

teristics of the motorcycle,

shorter useful tyre life

Always check that the tyre

pressures are correct.

WARNING

Tendency of valve inserts to

open by themselves at high

riding speeds

Sudden loss of tyre pressure

Install valve caps fitted with

rubber sealing rings and

tighten firmly.

Place the motorcycle on its

stand on firm, even ground.

Check tyre pressures against

the data below.

Tyre pressure, front

2.5 bar (with cold tyre; one-

up and two-up)

Tyre pressure, rear

2.9 bar (with cold tyre; one-

up and two-up)

If tyre pressure is too low:

Correct tyre pressure.

Summary of Contents for S 1000 RR

































































































































































































































































































































Search results

Summary of Contents for S 1000 RR

Reviews:

Brands by name

Popular brands

BMW Motorrad S 1000 RR, Rider'S Manual

Search results

Summary of Contents for S 1000 RR

Reviews:

Brands by name

Popular brands