BMW Motorrad S 1000 RR, Rider'S Manual

Page: 118 / 320

112 ADJUSTMENT
to turn the adjusting screw so
that mark 2 points to a higher
value on the scale.
To reduce damping: Use the
tool from the on-board toolkit
to turn the adjusting screw so
that mark 2 points to a lower
value on the scale.
Rebound stage, basic
setting, front
Position 5 (Road use with
rider 85 kg)
Position 5 (Racing use with
rider 85 kg)
Adjusting compression-stage
damping for rear wheel
without Dynamic Damping
Control (DDC) OE
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Adjust the compression-stage
damping by using the adjust-
ing screw 1 .
To increase damping: turn the
adjusting screw in the direc-
tion + with the toolkit.
To reduce damping: turn the
adjusting screw in the direc-
tion – with the toolkit.
Compression stage, ba-
sic setting, rear
Turn adjusting screw 1 until
the limit position in the direc-
tion + , then turn in direction –
for 5 clicks. (Road use with
rider 85 kg)
Turn adjusting screw
1 until
the limit position in the direc-
tion + , then turn in direction –
for 3 clicks. (Racing use with
rider 85 kg)
Adjusting rebound-stage
damping for rear wheel
without Dynamic Damping
Control (DDC) OE