BMW Motorrad S 1000 RR, Rider'S Manual

Page: 110 / 320

104 ADJUSTMENT
with milled parts package OE
Turn adjustment lever 1 to
the desired position.
The adjuster is easier to
turn if you push the clutch
lever forward.
Adjustment options:
From position A : narrowest
span between handlebar grip
and clutch lever.
In 4 steps in direction of po-
sition B for enlarging the dis-
tance between handlebar grip
and clutch lever.
FOOTREST SYSTEM
with milled parts package OE
Adjusting rotor
Setting of the rotor is the
same on the right and left.
The position of the rotor must
be set identically on the right
and left.
Rotor 3 enables foot clear-
ance and foot position to be
adjusted.
Slacken screw 1 in toothed
bushing 2 until toothed bush-
ing 2 can be eased out of ro-
tor 3 .
Rotor 3 can be adjusted to
any of 6 positions around its
axis of rotation.
Rotor 3 can be adjusted to
any of 5 positions along its
longitudinal axis.
Install rotor 3 in the desired
position and tighten screw 1
in toothed bushing 2 .
Threaded fastener for
footrest adjustment
Thread-locking compound:
mechanical
20 Nm