BMW Motorrad S 1000 RR, Rider'S Manual

Page: 75 / 320

69
Apply firm pressure to hand-
brake lever 1 or to the foot-
brake lever and then quickly
release the lever.
Green holding symbol is
displayed.
Hill Start Control is activated.
To switch off Hill Start
Control, operate handbrake
lever 1 or the footbrake lever
again.
The holding symbol disap-
pears.
Alternatively, ride off in 1st or
2nd gear.
Hill Start Control is deac-
tivated automatically when
the motorcycle pulls away.
Once the brake has been
fully released, the holding
symbol disappears.
Hill Start Control is deactiv-
ated.
For more information on Hill
Start Control see the section
entitled "Engineering details":
Hill Start Control function
( 180)
Switching Hill Start Control on
or off
Switch on the ignition ( 56).
Go to the
Settings
,
Vehicle settings
menu.
Switch
Hill Start Con-
trol
on or off.
Operating
Hill Start Control Pro
with riding modes Pro
OE
Requirement
Vehicle stationary and upright,
engine running.
ATTENTION
Failure of Hill Start Control
Risk of accident
Apply the brakes manually
to hold the vehicle.
The drive-off assistant Hill
Start Control Pro is only
a comfort system to enable
easier riding off on gradients
and should not be confused
with an electromechanical hold-
ing brake.
The Hill Start Control Pro
drive-off assistant should
not be used on inclines of over
40 %.