BMW Motorrad S 1000 RR, Rider'S Manual

Page: 209 / 320

203
the brake-caliper support and
the rear wheel.
Make sure that the quick-re-
lease axle fits into the recess
for the flats.
Insert left adjustment plate 1 .
Install axle nut 2 with washer,
but do not tighten it at this
point.
WARNING
Brake pads not lying against
the brake disc
Risk of accident due to
delayed braking effect.
Before driving, check that
the brakes respond without
delay.
Operate the brake several
times until the brake pads are
bedded.
Adjust the chain sag (
205).
CHAIN
Lubricating chain
Switch the ignition off and
select neutral.
Clean the drive chain with a
suitable cleaning product, dry
it and apply chain lubricant.
ATTENTION
Inadequate cleaning and lub-
rication of the drive chain
Accelerated wear
Clean and lubricate the drive
chain at regular intervals.
Lubricate the chain more fre-
quently if the motorcycle is
ridden in wet, dusty or dirty
conditions.
Lubricate the drive chain
at regular intervals.
min 800 km
To prolong chain life,
BMW Motorrad recommends
the use of BMW Motorrad
chain lubricant or:
Lubricant
Chain spray, O-ring compat-
ible
Wipe off excess lubricant.