background image

ABOUT THE BATTERYPLUS35-II

BMPRO’s BatteryPlus35-II is a battery management system designed specifically 
for use in recreational vehicles. The BatteryPlus35-II operates from 100 to 240V 
AC mains power supply, towing vehicle auxiliary and solar panel to provide 35A of 
current to simultaneously power caravan loads and charge the caravan battery.

The BatteryPlus35-II is available in a range of models to suite any RV and battery 
management needs.

FEATURE

BP35-II-SI

BP35-II-SR

BP35-II-HA

In-built Solar

20A - PWM

30A - MPPT

30A - MPPT

Solar Connection

Direct to BatteryPlus35-II

Lithium (LiFePO4) Charging

No

No

Yes

Maximum AC Charging Current

20A

20A

30A

OPTIONAL ADD-ONS

To get the most of your BatteryPlus35-II it may be used with the following products 
(sold separately) from the BMPRO range:

BC300 + CommLink

External Shunt for integration of additional accessories and high current loads such 
as inverters.

RVView Battery Monitor

To monitor battery parameters and charge sources.

Trek Battery Monitor

To gain greater insights into battery usage, the ability to monitor water tank levels 
and control water pumps.

O OdysseyLink

To monitor battery usage and caravan features (tanks and temperature) and control 
caravan loads from an in-built monitor.

MiniBoost

DC-to-DC charge-booster for RV applications.

Table 1: Comparison of features for the models of the BatteryPlus35-II range

8

More information https://www.caravansplus.com.au

Summary of Contents for BatteryPlus35-II Series









































Reviews: