Auxiliary
The auxiliary input is designed for use with 12V DC power sources. The voltage of the
DC power source connected to the auxiliary input must not exceed 14.8V.
Fuse protection is required at the auxiliary’s positive input and to protect the wiring
from the source. The rating on this protective fuse must not exceed 40A.
Mains
The BatteryPlus35-II mains power cord can accept power from either a 100 to 240V
50/60Hz voltage outlet.
Solar Input on the BatteryPlus35-II-SI
The
BatteryPlus35-II-SI
features an in-built PWM charger. This enables solar panels
to be connected directly to the BatteryPlus35-II-SI without the need for an external
regulator.
The PWM charger supports the use of standard 12V solar panels up to a total of 20A /
300W 450W.
Solar Input on the BatteryPlus35-II-HA and the BatteryPlus35-II-SR
The
BatteryPlus35-II-HA
and the
BatteryPlus35-II-SR
both feature an in-built MPPT
charger. This enables solar panels to be connected directly to the BatteryPlus35-II-
HA or BatteryPlus35-II-SR without the need for an external regulator.
The MPPT charger supports the use of standard 12V solar panels up to a total of 30A.
WARNING
To prevent your car battery from discharging when the vehicle’s ignition is o
ff
, please
ensure the auxiliary is wired so that it is automatically disconnected in this condition.
WARNING
Ensure the solar panel Open Circuit Voltage (Voc) does not exceed 25V and Short Circuit
Current (Isc) rating does not exceed 20A.
WARNING
Ensure the solar panel Open Circuit Voltage (Voc) does not exceed 25V.
23
More information https://www.caravansplus.com.au
