Disconnecting a Battery from the BatteryPlus35-II
1.
Power o
ff
all loads connected to the BatteryPlus35-II, the easiest way is with the
switch connected to the BatteryPlus35-II’s RSW input.
2.
Turn o
ff
and remove all power sources (auxiliary/mains/solar) to the
BatteryPlus35-II.
3.
Disconnect the battery’s negative (black) terminal from the BatteryPlus35-II
Batt- connection point.
4.
Disconnect the battery’s positive (red) terminal from the BatteryPlus35-II Batt+
connection point
Connecting a Battery to the BatteryPlus35-II
1.
Power o
ff
all loads connected to the BatteryPlus35-II. The easiest way is with the
switch connected to the BatteryPlus35-II’s RSW input.
2.
Turn o
ff
and remove all power sources (auxiliary/mains/solar) to the
BatteryPlus35-II.
3.
Connect the battery’s positive (red) terminal to the BatteryPlus35-II Batt+
connection point.
4.
Connect the battery’s negative (black) terminal to the BatteryPlus35-II Batt-
connection point.
Connecting Multiple Batteries
Before connecting multiple batteries in parallel to the BatteryPlus35-II, check that
all batteries are:
9
the same manufacturer
9
the same model
9
the same capacity
9
the same age, and
9
fully charged.
The recommended wiring for connecting multiple batteries in parallel to the
BatteryPlus35-II is below. Depending on system requirements, a qualified auto-
electrician may wire the batteries di
ff
erently.
Figure 6: Recommended
wiring to connect multiple
batteries in parallel
21
More information https://www.caravansplus.com.au