Connect to the mains water supply using the hose connector
provided and fasten with a hose clip. Make sure the water main is
able to provide the water flow required to operate the equipment
(see rating plate).
Open the transparent cover by pressing the front button located on
the handle.
Adjust the four supports, adapting them to the size of the container
to be washed.
The supports must be far enough apart to enable the box to be
inserted without forcing (leave about 1 cm play on both sides of the
container)
Place the detergent hose in the detergent tank, making sure the
ballasted filter is at the bottom of the tank to enable all the liquid to
be taken up.
6.4 Electrical connections
Check the correct voltage and frequency on the rating plate on the
back of the machine. Connect the power cable to an electric
socket (make sure the line is adequately protected by a differential
switch).
6.5 Starting the machine and work cycle
Press the start button on the electrical panel at the back. N.B.: the
machine has an automatic release system activated in the event of