IP50HD
USER MANUAL
Contact:
|
|
07
Understanding Product Status Lights
IP50HD products have several LED lights to indicate connectivity status, or to help diagnose connection problems.
1
3
2
4
IP50HD Status Lights
1
LAN PoE status light - solid Orange indicates PoE from the network switch powering the Multicast product
2
LAN status light - solid Green indicates active network connection
3
Power status light - Off = No power, Flashing = Product booting, On = Power on / booted
4
Link status light - Off = No connection to network, Flashing = not connected to any device (another Multicast
product or network switch), On = Connected to Multicast device or network switch
Audio Connections - TX Audio Embedding / De-embedding
1
Audio In - Analogue L/R Line Level audio input (3-pin Phoenix)
The analogue line level input can be used to replace the original HDMI audio of the source connected to the
Multicast Transmitter with analogue L/R 2ch line level audio. The embedded analogue audio is then distributed
with the adjacent HDMI video signal throughout the Multicast system.
Switching between original HDMI audio and embedded line level analogue 2ch audio is achieved using Blustream
serial/Telnet/IP commands, or by selecting the Audio Source within the ACM200 web-GUI.
Please note:
It is only possible to select either HDMI audio or local analogue line input. It is not possible to
distribute both audio sources simultaneously.
1
Analogue L/R Line Level audio output (3-pin Phoenix)
The IP50HD-RX Multicast Receiver includes audio breakout from the selected HDMI source to associated Analogue
L/R audio outputs. Extracted audio will be concurrent with the corresponding HDMI video output.
Audio Connections - RX Audio Breakout
1
2
2
Audio Out - Analogue L/R Line Level audio output (3-pin Phoenix)
The analogue line level output can be used to breakout the embedded 2ch analogue source audio from the HDMI
input signal.
Please note:
The source input must be PCM 2ch audio for the analogue audio output to work. The Blustream
Multicast products do not support multichannel audio signals.
1
