IP50HD
USER MANUAL
Contact:
|
|
03
Our Contractor HD Multicast distribution platform allows distribution of AV and control signals over a 1Gb network.
The IP50HD-TX/RX is an industry leading 1080p HDMI distribution system that uses H.265 compression technology
to deliver HDMI, Bi-directional IR, RS-232 & USB/KVM up to lengths of 100m over standard network architecture. The
IP50HD can be powered via PoE from the network switch or locally should the switch not support PoE. With multiple
configuration options available the Multicast HD solution is ideal for both commercial and residential installations.
Furthermore the ACM200 Advanced Control Module with in-built web-GUI, pre-built 3rd party control drivers,
and simplified switch configuration guides simplify Multicast product installation, and negate the need for an
understanding of complex network infrastructures.
Introduction
Please note:
The Blustream Multicast system distributes HDMI video over Layer 3 Managed network hardware. It is advised that
Blustream Multicast products are connected to an independent network switch to prevent interference or drop in
signal performance due to other network products demands.
Please take care to make sure that the instructions contained within this manual have been read and understood, and
that the network switch has been correctly configured prior to connecting any Blustream Multicast products. Failure to
do so will result in problems with configuration of the system and video performance.
• Advanced HD video, control and KVM over network infrastructure
• Extends HDMI up to a distance of 100m over a single CAT cable
• Supports unicast transmission over unmanaged networks
• Supports multicast transmission for large managed networks
• Supports up to 1080p 60Hz max
• In-built video scaler on Receiver to allow for inclusion of displays with differing resolution capabilities
• Transmitter features 1 x HDMI loop-out for integrating local displays or cascading to multiple devices
• Supports PCM 2.0 channel audio only
• Advanced signal management for independent routing of IR, RS-232, USB/KVM, and video/audio
• Analogue L/R audio embedding on Transmitter and audio breakout on both Transmitter and Receiver
• HDCP 1.4 compliant with advanced EDID management
• PoE (Power over Ethernet) to power Blustream products from a PoE switch
• Local 12V 1A power supply should Ethernet switch not support PoE (not included)
• Features 2 operational modes:
• - Matrix distribution (requires 1Gb network switch)
• - One-to-one HDMI extender (no network switch required)
• Simple configuration via web-GUI through the ACM200
• RS-232, IR and Telnet/IP integration for control of Multicast system using the Blustream ACM200
• 3rd party drivers available for major control brands
Features