IP50HD
USER MANUAL
Contact:
|
|
09
The Blustream range of Multicast products include multiple options for control and routing of IR.
IMPORTANT: Blustream InfraRed products are all 5V and NOT compatible with alternative manufacturers
InfraRed solutions. When using third party 12V IR control solutions please use the Blustream IR-CAB cable
for IR conversion, or ensure 12V IR is enabled in the IP50HD-TX/RX.
Each Blustream Multicast Transmitter and Receiver is supplied with both an IR Receiver and Emitter, details below:
IR Emitter - IRE1 & IRE2 (IRE2 sold separately)
Blustream 5V IR Emitter designed for discrete IR control
of hardware
IR Receiver - IRR
Blustream 5V IR receiver to receive IR signal and
distribute through Blustream products
IR Control Cable - IR-CAB (sold separately)
Blustream IR Control cable 3.5mm Mono to 3.5mm
Stereo for linking third party control solutions to
Blustream products.
Compatible with 12V IR third party products.
Please note:
Cable is directional as indicated
Infrared 3.5mm Pin-Out
IR Emitter - Mono 3.5mm
IR Receiver - Stereo 3.5mm
InfraRed Distribution
Signal
5V
Ground
Signal
Ground
