IP50HD
USER MANUAL
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
02
Surge protection device recommended
This product contains sensitive electrical
components that may be damaged
by electrical spikes, surges, electric
shock, lightning strikes, etc. Use of
surge protection systems are highly
recommended in order to protect and
extend the life of your equipment.
Contents
Thank you for purchasing this product
For optimum performance and safety,
please read these instructions carefully
before connecting, operating or adjusting
this product. Please keep this manual for
future reference.
Introduction
03
Features
03
Panel Description - IP50HD-TX Transmitter
04
Panel Description - IP50HD-RX Receiver
05
Unicast or Multicast
06
HDMI over IP Network Configuration
06
Configuration & Control of an IP50HD System
06
Understanding Product Status Lights
07
Audio Connections - Transmitter
07
Audio Connections - Receiver
07
InfraRed Control
08
Remote Control - REM100
08
InfraRed Distribution
09
Infrared Pass-Through (Source Control)
10
Infrared Pass-Through (Display Control)
11
RS-232 (Serial) Bi-Directional Pass-Through
12
Manual Configuration
13-14
EDID Control
15
Scaler Output Control
16
IP50HD IP Addresses
17
IP50HD Web-GUI 18-22
Configuring a Computer IP address
23-25
Schematic
26
Specifications
27
Package Contents
27
Certifications
28
Safety And Performance Notice
The transmission distances of HDMI
over UTP cables are measured using TE
CONNECTIVITY 1427071-6.
EIA/TIA-568-B termination (T568B) of
cables is recommended for optimal
performance.
To minimise interference of the unshielded
twisted pairs in the CAT5e/6/6a cable do
not run the Cat5e/6/6a cabling with or in
close parallel proximity to mains power
cables.
Do not substitute or use any other power
supply other than approved PoE network
products or approved Blustream power
supplies.
Do not disassemble any Blustream
Multicast products for any reason. Doing so
will void the manufacturer’s warranty.