IP50HD
USER MANUAL
www.blustream.com.au
|
www.blustream-us.com
|
www.blustream.co.uk
04
IP50HD-TX Front Panel
11
10
9
8
6
2
1
3
4
5
1
Config Up/Down - configure IP50HD-TX manually
2
Channel status window - displays product information
3
Reset button - short press to restart / reboot device, press and hold for 10 seconds to factory reset device
4
Power LED indicator
5
Link LED indicator - solid status light indicates a stable connection to the network switch
6
Power port – use 12V 1A DC adaptor (sold separately) if not using a PoE network switch
7
LAN Connection (PoE) - connect to network switch for HDMI video distribution
8
IR IN (IR input) – 3.5mm stereo jack. Transmits IR to any IP50HD-RX receiver currently viewing the IP50HD-TX.
Supports 5V or 12V IR selectable in product web-GUI or ACM200 web-GUI
9
IR OUT - (IR output) - 3.5mm mono jack – routed IR from any IP50HD-RX (zone output) allowing source control.
Supports 5V or 12V IR selectable in product web-GUI or ACM200 web-GUI
q
Assignable bi-directional RS-232 port – connect to third party control device to extend RS-232 commands to any/
multiple IP50HD Multicast products RS-232 port
w
USB host connection for USB/KVM routing within Multicast system
e
L/R Analogue audio line input - embed analogue audio onto HDMI signal
r
L/R Analogue audio line output - 2ch audio that supports 2ch PCM source inputs
t
HDMI input – connect to a HDMI source
y
HDMI output - loop out of HDMI input source
IP50HD-TX Rear Panel
Panel Description - IP50HD-TX Transmitter
87
15
14
13
12