3
AQT-RCS
Instruction Manual
PRECAUTIONS
REQUIREMENTS
Avoid Heat Buildup
Allow (1) EIA rack space (1.75") between powered headend products in the equipment
racks. (44.45mm)
Ensure easy access to rack wiring.
Allow a minimum of 18" behind the equipment rack(s). (457.2 mm)
Facilitate servicing and maintenance.
Allow a minimum of 36" of clearance in front of the equipment rack(s). (1 meter)
Avoid direct heating or air conditioning.
If unavoidable, use deflector plates.
AC power source outlets.
Locate equipment near sufficient outlets to provide power for test equipment
and power tools.
Rack Support.
Make certain rack supports are sufficiently rigid to support racks.
Building leakage.
Beware of dripping water onto equipment from leaky roofs, waveguide roof entries, and
cold water pipe condensations.
Table 1 - Installation Precautions Table
Safety Instructions
➧
Read all safety and operating instructions before you operate the unit.
➧
Retain all safety and operating instructions for future reference.
➧
Heed all warnings on the unit and in the safety and operating instructions.
➧
Follow all installation, operating, and use instructions.
➧
Unplug the unit from the AC power outlet before cleaning. Use only a damp cloth for cleaning the exterior of
the unit.
➧
Do not use accessories or attachments not recommended by Blonder Tongue, as they may cause hazards, and
will void the warranty.
➧
Do not operate the unit in high-humidity areas, or expose it to water or moisture.
➧
Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious
personal injury and damage to the unit. Install the unit only in a mounting rack designed for 19” rack-mounted
equipment.
➧
Do not block or cover slots and openings in the unit. These are provided for ventilation and protection from
overheating. Never place the unit near or over a radiator or heat register. Do not place the unit in an enclosure
such as a cabinet without proper ventilation. Do not mount equipment in the rack space directly above or below
the unit.
You should always follow these instructions to help ensure against injury to
yourself and damage to your equipment.
Returning Product for Repair (or Credit)
A Return Material Authorization (RMA) Number is required on all products returned to Blonder
Tongue
,
regardless if the product is being returned for repair or credit.
Before returning product,
please contact the Blonder Tongue Service Department at 1-800-523-6049, Ext. 4256 or visit our website:
www.blondertongue.com
for further information.
