12 AQT-RCS
Instruction Manual
IP Address
Link to
www.blondertongue.com
The Headend Status Page provides a snapshot of the status for each AQT module connected and installed to a PCM that is
entered and connected to the AQT-RCS. PCM units are displayed vertically in the order they are entered in the setup section.
There are two main areas of the 'Headend Status' page that provide information to the operator. The top box provides information
from the AQT-RCS including editable Name & Location fields, real-time clock, date, serial number and a temperature monitor
displayed in degrees Fahrenheit. The lower and subsequent boxes (not shown) provide information for each PCM and respective
AQT module installed. A color coded status indication is provided for each module that is determined by both the module lock
status and the SNR status.
Headend Status Page
Click to refresh &
update the page
Click for Unit Info
page
Click for Setup page
AQT-PCM Address
Unit Type
Power Status
Module Number,
Type & Status
Input Transponder Frequency
Output Channel or Frequency
Temperature
Indication
The 'Unit Information' page provides detailed information for each AQT module connected to a respective AQT-PCM unit.
Clicking the Unit Info button or anywhere on the PCM box in the 'Headend Status' page will load the 'Unit Information' page.
The Unit information is displayed for each particular unit installed in the headend. The digital address of the PCM is found at the
top left below the Blonder Tongue logo. Click the arrow and select the desired address to toggle between specific PCM units.
AQT-RCS Unit Information Page
NOTE:
If 'TYPE: Error' (displayed in red) occurs, then an invalid address or unit not supported was entered or communication
to the unit was lost (please check cables).
