37
EQAM-420B
User Manual
6.10 "Event Log" Screen
The “Event Log” screen (Figure 6.10) is a “read and write” screen where the following parameters can be displayed or
configured. The data in Event Log can be forwarded to a SysLog database – (see , , & of section 6.8.1 for
details). The lines are color coded as follows:
Red font = error message
Blue font = information message
Green font = confirmation or feedback message
Figure 6.10 - "Error Log" Screen
Event Log Destination:
see of Section 6.8.1 for details.
Log Destination Port: see of Section 6.8.1 for details.
SNMP Destination Port: see of Section 6.8.1 for details. (future option)
Clear Log: allows the user to clear the records generated during unit’s boot-up process and operation afterward. The
records are cleared if the unit loses power.
Lines to Display:
allows the user to select the number of lines to be displayed. The unit supports up to 400 Mb of data
or approximately 65,000 lines. The range is 1 to 65,535.
Save Number of Displayed Lines: allows the user to save the error log on the screen. Please note that the error log
would be saved only on the screen and not on any database.
30
31
32
1
2
3
4
5
6
22
23
27
1
3
5
2
4
6
