Do not change the default LDAP port parameters unless there is a port conflict with another service on the same computer. If
you change the port number or host server information, you must stop and restart the BlackBerry MDS Connection Service to
reload this information.
1.
In the BlackBerry Manager, in the left pane, click a BlackBerry MDS Connection Service.
2.
On the
Connection Service
tab, click
Edit Properties
.
3.
Click
LDAP
.
4.
Configure the LDAP server settings.
5.
Click
OK
.
After you finish:
Configure the BlackBerry MDS Connection Service to retrieve the status of certificates for web servers.
Configure the BlackBerry MDS Connection Service to retrieve the status of certificates for
web servers
1.
In the BlackBerry® Manager, in the left pane, click a BlackBerry MDS Connection Service.
2.
On the
Connection Service
tab, click
Edit Properties
.
3.
Click
OCSP
.
4.
Perform any of the following tasks:
Task
Steps
Configure the BlackBerry MDS Connection Service to accept OCSP
servers (responders) that the BlackBerry device specifies.
a.
Click
Use Device Responders
.
b.
In the drop-down list, click
True
.
Configure the OCSP handler to use the OCSP responder extension
in a certificate.
a.
If a certificate is present, click
Use Certificate Extension
Responders
.
b.
In the drop-down list, click
True
.
Configure the default web address of the OCSP responder.
a.
Double-click
Default Responder URL
.
b.
Type the web address of the OCSP responder.
Configure the web address of the server that the CRL is located on. a.
Double-click
Default CRL Server URL
.
b.
Type the web address of the CRL server.
5.
Click
OK
.
After you finish:
Install retrieved certificates for web servers.
Administration Guide
Configuring a BlackBerry MDS Connection Service to trust web servers
50
