877-877-2269 | blackbox.com
Page 90
Chapter 5: Configuring the Router
5.16.1 Static Route List
Choose “Advanced Routing —> Static Route List,” then you can configure the static route in the next screen. A static route is a
pre-determined path that network information must travel to reach a specific host or network.
Figure 5-94. Static Route.
To add static route entries:
1. Click Add New, and you will see the following screen.
Figure 5-95. Add or Modify a Static Route Entry.
2. Enter the following data:
• Destination IP Address—The Destination IP Address is the address of the network or host that you want to assign to a static
route.
• Subnet Mask—The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the
host portion.
• Gateway—This is the IP Address of the gateway device that allows for contact between the router and the network or host.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable Selected button to enable the selected entries.
Click the Disable Selected button to disable the selected entries.
Click the Delete Selected button to delete the selected entries.
