Page 53
877-877-2269 | blackbox.com
Chapter 5: Configuring the Router
Figure 5-35. Back panel of the router.
Figure 5-36. Add A New Device.
Step 2: Press and hold the WPS button of the client device.
Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process.
Step 4: When the WPS LED is on, the client device has successfully connected to the router.
II. Enter the client device’s PIN on the router.
Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected Setup PIN number.
Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4 30, then Figure 4 33 will appear.
Figure 5-37. Add A New Device.
Step 2: Enter the PIN number from the client device in the field on the above WPS screen. Then click the Connect button.
Step 3: “Connect successfully” will appear on the screen, which means the client device has successfully connected to the router.
III. Enter the router’s PIN on your client device.
Use this method if your client device asks for the router’s PIN number.
