Page 83
877-877-2269 | blackbox.com
Chapter 5: Configuring the Router
5.15.1 Rule
Choose “Access Control ― Rule,” then you can view and set Access Control rules in the screen.
Figure 5-79. Access Control Rule Management.
• Enable Internet Access Control—Select the check box to enable the Internet Access Control function, so the Default Filter Policy
can take effect.
• Description—Displays the name of the rule and this name is unique.
• LAN Host—Displays the host selected in the corresponding rule.
• Target—Displays the target selected in the corresponding rule.
• Schedule—Displays the schedule selected in the corresponding rule.
• Enable—Displays the status of the rule, enabled or not. Check this option to enable a specific entry.
• Edit—Edit or delete an existing rule.
• Add New—Click the Add New button to add a new rule entry.
• Enable Selected—Click the Enable Selected button to enable selected rules in the list.
• Disable Selected—Click the Disable Selected button to disable selected rules in the list.
• Delete Selected—Click the Delete Selected button to delete selected entries in the table.
How to add a new rule:
1. Click the Add New button and the next screen will pop up.
2. Give a name (e.g. Rule_1) for the rule in the Description field.
3. Select a host from the LAN Host drop-down list or click “Add LAN Host.”
4. Select a target from the Target drop-down list or click “Add Target.”
5. Select a schedule from the Schedule drop-down list or click “Add Schedule.”
6. In the Status field, select Enabled or Disabled to enable or disable your entry.
7. In the Direction field, select IN or OUT.
8. Select a schedule from the Protocol drop-down list.
